您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE ARP1395 Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Ma

作者:标准资料网 时间:2024-05-15 17:35:34  浏览:9245   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE ARP1395
Title:Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Mar 2003)
Issuing Committee:Age-2a Cargo Handling Committee
Scope:The dedicated aircraft addressed herein is to be an uncompromised all-freighter aircraft developed primarily for use in the civil transport industry.The requirements of thsi document are applicable but not limited to airborne equipment which is subject to the airworthiness directives of FAR part 25 and which is designed to accmmodate unitized cargo in the form of intermodal containers and other compatible unitized load devices. Intermodability in the context of this document encompasses the air-truck-rail-sea modes, and considers uncertificated as well as certificated unit load devices (ULDs). This document covers the fundamental prerequisites for the aircraft cargo compartment and the onboard cargo handling and restraining system. The cargo system and compartment considers primarily 96 in (2.44 m) wide, multiple bottom configuration ULDs. The cargo system and compartment should handle outsize cargo and should consider Civil Reserve Air Fleet (CRAF) requirement compatibility. The cargo system, compartment, and the cargo-related aircraft physical features should be sufficiently defined to establish specifications for ground interface mobile and/or fixed loading equipment and facilities with a goal of standardization thereof. This document is intended to assist air carriers in standardizing to the degree necessary to insure the smooth flow of cargo between ground and aircraft and between various aircraft in the future. Thhis document is not intended to inhibit the development of new systems, but rather to establish a solid interface for the introduction of such systems.
下载地址: 点击此处下载
【英文标准名称】:Multimediasystemsandequipment-Colourmeasurementandmanagement-Part4:Equipmentusingliquidcrystaldisplaypanels(IEC61966-4:2000);GermanversionEN61966-4:2000
【原文标准名称】:多媒体系统和设备.颜色测定和管理.第4部分:使用液晶显示屏的设备
【标准号】:DINEN61966-4-2000
【标准状态】:现行
【国别】:德国
【发布日期】:2000-12
【实施或试行日期】:2000-12-01
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:电缆电视系统;荧光屏;多语种的;比色法;检查绘图仪;定义;彩色显象管;显象管;测量;电视;染色;液晶显示;液晶显示;测量条件;显示装置(计算机);特性;信息技术;测量技术;颜色;颜色;多媒体;电视信号;搬运;测量方法;接收机;
【英文主题词】:
【摘要】:Thedocumentdealswithequipmentusingtransmissive-typeliquidcrystaldisplay(LCD)panelstodisplaycolourimagesforuseinmultimediaapplications.Itdefinesinputtestsignals,measurementconditionsandmethodsofmeasurement,soastomakepossiblethecolourmanagementandcomprehensivecomparisonoftheresultsofmeasurement.Aseriesofcharacteristicsforcolourreproductionandmanagement,andtheassociatedmethodsofmeasurementforuseinmultimediasystemsandequipment,areapplicabletotheassessmentofcolourreproduction.
【中国标准分类号】:M70
【国际标准分类号】:17_180_20;31_120;33_160_60
【页数】:32P;A4
【正文语种】:德语


基本信息
标准名称:钨条
英文名称:Tungsten bars and rods
中标分类: 冶金 >> 粉末冶金 >> 金属与合金粉末
ICS分类: 冶金 >> 有色金属产品 >> 其他有色金属产品
替代情况:替代GB/T 3459-1982
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2006-07-18
实施日期:2006-11-01
首发日期:1982-12-31
作废日期:1900-01-01
主管部门:中国有色金属工业协会
提出单位:中国有色金属工业协会
归口单位:全国有色金属标准化技术委员会
起草单位:株洲硬质合金集团有限公司
起草人:李宪平、廖彬彬、刘铁梅、杨建国、何国新、张江峰
出版社:中国标准出版社
出版日期:2006-11-01
页数:平装16开/页数:7/字数:8千字
计划单号:20031775-T-610
书号:155066·1-28174
适用范围

本标准规定了钨条的要求、试验方法、检验规则、标志、包装、运输、储存及合同内容。
本标准适用于粉末冶金法制取的钨条。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 粉末冶金 金属与合金粉末 冶金 有色金属产品 其他有色金属产品